Extend the life of your wireless security camera and achieve uninterrupted surveillance capabilities with the weatherproof Vosker Universal Solar Power Bank, a new power solution designed to provide continuous power to your camera in remote locations.
This solar panel is IP66 weatherproof rated, meaning power will be provided to a wireless camera regardless of heavy rain or challenging environmental conditions. An adjustable mounting arm is provided for greater autonomy and allows for mounting in hard-to-reach areas.
Features:
Solar Charging Feature
Rechargeable 15,000 mAh capacity
Outputs 12V/2A, 9V/2.6A, 6V/4A Fast Charge USB
Universal: charges smartphones, tablets and more
IP66 Rating (Weatherproof, Shockproof, Dustproof)
Max Power: 10 Watts
Specifications
Max Power
10W
Charging Time
5 hours with power adaptor
Operating Temperature
-20°C to 60°C
Capacity
15 Ah, 55.5 Wh
USB (20 W)
USB-A, USB-C
Input Voltage
5 V/2A
Output Voltage
12 V/2 A, 9 V/2.6 A, 6 V/4 A, USB
Dimensions (HWD)
27x26x5.2 cm
What's In The Box
1 – 1x 60” USB-C output cable (V300)
2 – 1x installation strap
3 – 1x 36” Micro USB output cable (V150)
4 – 1x 60” USB-A to USB-C output cable
5 – 1x Lithium battery solar panel
6 – 1x 60” 12 V 1.5 mm output cable (V100, V200)
7 – 1x 5 V DC power adapter
8 – 1x plastic screw anchor
9 – 1x mounting arm
10 – 1x Quick start guide (not pictured)
Setup Guide
Getting Started with the V-PWRB
Charging Before Installation
Before installing the V-PWRB, make sure it is fully charged.
1 – Plug the included DC power adapter into the (IN 5V) port. During this charging process, the red LEDs will flash to indicate the charge level, while the green light will remain steady on. It takes between 4-6 hours to fully charge.
2 – Holding the TEST button for 5 seconds will display the charge level.
Note: Once you installed the Universal Solar Power Bank after it is fully charged, the sunlight will continue to charge the battery. The green light will be steady on when it is charging.
Recommendation: Charge your camera lithium battery (V-LIT-B2 or V-LIT-B3) when you are setting up your Universal Solar Power Bank. This will provide the most complete autonomy as the Universal Solar Power Bank and the camera lithium battery will work in tandem.
Choosing the Right Cable
It’s important to use the right cable to connect your VOSKER camera to the Universal Solar Power Bank:
V100/V200: use the supplied 1.5mm cable from the camera to the 12V output port on the back of the Solar Power Bank.
V150: use the supplied Micro-USB cable from the camera to the USB port on the back of the Solar Power Bank.
V300: use the supplied USB-C cable from the camera to the USB-C port on the back of the Solar Power Bank.
Note: the Universal Solar Power Bank charges only its integrated lithium battery and powers the camera. It will not charge a lithium battery pack (V-LIT-B2 , V-LIT-B3) in the camera.
Reviews
There are no reviews yet.
Be the first to review “Vosker® V-PWRB Universal Solar Power Bank” Cancel reply
Reviews
There are no reviews yet.